HEXIUM 300 or HEXIUM 7.62? The best new silencers from sig sauer, One Is Right for You
What this video covers
This video compares the HexM 300 and HexM 762 suppressors to help viewers decide between the two models. The host evaluates both suppressors on gas-operated semi-automatic rifles and bolt-action rifles, testing sound performance and gas blowback using supersonic and subsonic ammunition.
Key takeaways
- The test addresses viewer inquiries regarding whether to choose the HexM 300 or HexM 762 suppressor.
- On a semi-automatic gas gun, the HexM 762 produced noticeably less gas blowback and provided an overall better shooting experience.
- Port pop and action noise on the gas gun made supersonic and subsonic rounds sound virtually identical between the two suppressors from the shooter's perspective.
- On a bolt-action rifle, the sealed action allowed the HexM 300 to outperform the HexM 762, demonstrating noticeably better sound suppression.
- The HexM 762 was louder on the bolt gun but produced a deeper tone while remaining relatively close in perceived volume.
- The host concludes that the HexM 762 is ideal for gas guns due to lower back pressure and a smaller profile, while the HexM 300 excels on bolt guns.
Topics covered
- Gas Gun Performance and Port Pop
- Testing on a semi-automatic rifle revealed that action noise and gas bleeding off from the port made it difficult to distinguish any volume difference between the HexM 300 and 762, while the 762 offered lower back pressure and less gas to the shooter's face.
- Bolt Gun Sound Evaluation
- When tested on a sealed bolt-action system firing M80 ball ammunition, the HexM 300 proved noticeably quieter than the HexM 762, highlighting the performance advantages of the larger suppressor on non-reciprocating platforms.
- Platform-Specific Recommendations
- The reviewer suggests choosing the HexM 762 for semi-automatic gas guns to save weight, reduce length, and minimize blowback, while recommending the HexM 300 for bolt-action rifles where maximum sound suppression is the primary goal.
“I think being semi-auto, I don't think I'm hearing a difference.”
FULL TRANSCRIPT
Yo, everybody. In this video, I wanted
to answer a question that came up a
whole bunch in the Sig video. Now, the
SIG video, you saw we had the whole
lineup of all the different suppressors,
and I put them through the ringer. That
was a long day of filming, and I'm very
grateful for Sig for supporting that day
and for you all for watching that video
and commenting. That really does go a
long way. So, I super appreciate you
guys doing that. Next is, should I get
the HexM300 or should I get the HexM
762? So, what I want to do today is put
them on bolt gun, bolt gun, gas gun, gas
gun, and see if I can hear the
difference between the two. Given our
gas guns, we probably want to keep a
little bit shorter. I'm guessing that
the 762 might do just like I mean, it's
not going to do as good as the Hex 300,
but I'm thinking we might not notice on
a gas gun given there's going to be some
fork pop, and especially on that gas
gun, I want to keep it as short and as
light as possible. So, now let's dive
into some testing and find out how this
guy measures out. 762 versus 300.
Okay, here we go. Hex 300. Gas all the
way open.
Little bit of gas still bleeding out
here. Not bad, but definitely a lot more
gas than unsuppressed. Okay, HexM 762.
Gas all the way open.
Not bad on gas. Definitely overall
better experience. Okay, one round for
sound.
Very dull sound to it. Really not bad at
all. One with ears then one without to
burn off any first round pop.
Really it sounds the same because all
that gas bleeding off from port pop. See
gas is coming out back here.
Sounds a lot the same on a gas gun. Sub
super sub super. Try to get them as
close to in line together as possible.
Okay, I've got the uh 762 on the left
and the 300 on the right. Start on the
left, the 762.
Not bad.
A little bit quieter. Super. Oh, that
was a sub. Wow, that was real quiet.
I would say on gas guns, they sounded
really the same. I'm gonna do one more
each just to see if I can find any kind
of difference. I'm gonna super sub super
sub. This time I'm gonna start on the
HexM 300. Super.
Those sounded the same. Sub.
I think being semi-auto, I don't think
I'm hearing a difference. Let's switch
to bolt gun and see if we can find a
difference. You can see that the same
length. Okay, these are M80 ball.
Okay, I've got the 762 on the left and
I've got the 300 on the right. Here we
go. 762.
Yeah, definitely the the 762 is louder
on the bolt gun, but it's still pretty
darn close.
Yeah, louder, but deeper on the left,
but still not bad on either. Okay, in
closing for today, I think it goes
pretty obvious that the 762 is the ideal
gas gun suppressor. It's lower in back
pressure and it's obviously smaller. And
I really can't hear much of a difference
between the two when I'm behind the gun.
Maybe if I was 3T left, back right,
whatever, I would really hear that that
difference between the bigger one and
the smaller one. But from behind the
gun, I would say it was really very
similar. Now, when you're talking about
a sealed system, I can really hear the
difference of the Hexen 300. That's
where that suppressor truly shines. So,
it's totally up to you what you want to
do. In the end, I'm going to say I like
both of them. I'm really glad I have
both of them. I look forward to much
more testing. The Tin Can was just
approved, so I'll go pick that up soon.
And the Endur, I hear that's on the way
as well. So, much more testing to come,
guys. I super appreciate all the support
you've given the channel thus far. Stay
safe and we'll see you in the comments.
GET MORE FROM YOUR TRANSCRIPTS
Sign up for free and unlock interactive viewer, AI summaries, translations, concept maps, and more. No credit card required.