Buff Kit - How to Buff & Polish with the Deluxe Buffing Kit from Eastwood

Hi I'm mark roe group product manager here at Eastwood you've seen my shop

typical pilot you guys got now we're back here at Eastwood and I'm going to show you one of our hot new

products here

what is it's our new

all components buff kit

now this kit here we have is utilized

to either use a cordless drill

or a pneumatic die grinder

these kits here you have your five different compounds for your steels aluminum's and

plastics

small felt bob's here in different shapes get you in and out of a lot of nooks and crannies especially

intake manifolds polishing up carbs getting corrosion off of them

two different size mushroom buffs

uh... large around, tapered

and your traditional wheels, two spiral sewn and a loose sewn

what I want to show you here is some of the stuff that you can do it this kit itself

what I got here is a

typical small block chevy aluminum head but what I want to do is add some detail to this so

this front accessory mount pad right here

area that's machined to a

beautiful polished luster which will work real nice again

some fabricate aluminum valve covers that are going to go on here

taillight bezel

This is aluminum has some anodizing on it that we removed were removed but it's it's

corroded it's got some

nicks and scratches on it we can show you how you can quickly transform this into uh... back

to day one

cast iron water neck here believe it or not you can take pretty much any

metal

smooth it and bring up to a high lester shine also

something to do once you are done with the project

compress the other one in the house there this is all just a

corroded brass

uh... door pull from the kitchen

one other thing i want to tell you of the tips

and tricks that

we got here

this is an old hacksaw blade

we would do is keep your buffs clean uh... so what to do with this is a

I take it simply clamp it into a bench vise

and then with your buff turning 0:01:59.100,0:02:03.120 simply spin it over to blade here and then it'll pull the compound and metal

contaminants off of the wheel keeping it nice and clean

Alright, now what I want to do is show you how easy it is to use this kit

uh... we're gonna start off on doing

front part of the aluminum cylinder head here here

that we take a spiral song buff

chuck it into any

cordless trail or corded drill

the compound comes in these cardboard tubes

to use it simply take the car board

peel it off

And when you're not using the compounds to store them just put them in some ziplock bags

always clean

before changing compounds

and you can see the difference there

so in summary here what we want to show you is that

just a little bit of effort

and the Eastwood buff kit you can take even a piece of trim like this

bring it back to what it was day one

this took about a couple minutes on that cast iron water mac

you see right up here

with a little more effort you bring that to a mirror shine

I showed you earlier

the

kitchen piece of hardware here

what you can do there is just polish a little bit of the center section here

And bring that up into a brilliant luster very quickly