Unintentional ASMR 🔬 Microscope Product Presentation & Setup (Asian Accent, Soft Spoken, Unboxing)

the m82 es model

of omax is a vinyl killer compound

microscope

equipped with two eyepieces

and four objective lenses

combined together this microscope allows

up to eight levels of

minification this model also has some

distinct features of its own

first it has a double layer mechanical

stage

so let me just turn it a little bit to

give you a better view

the adjustment knobs can move the stage

in the x direction

and in the y direction

in comparison with a single layer stage

the double

layer has its adjustment knobs placed at

the most convenient

place for its users that is on the right

hand side

under the stage

also this model has coaxial

course

and fine

focus adjustment knobs on both sides of

the microscope

this feature is designed specifically to

ease the adjustment required for your

observation

as for the illuminator this model is

equipped with led light

in addition to its long lifetime the led

bulb

produces an evenly distributed light

and barely any heat

also the brightness can be adjusted

very easily to the convenience of its

users

now on top of these special features

the model is also designed to be

adaptable to each user's specific needs

starting with a sliding intrapupular

distance adjustment

the distance can be adjusted from 55

millimeters

all the way up to 75

millimeters depending on each user's

intrapupular distance

also the ocular diopter

can be adjusted on each eye tube

this feature is convenient for users who

have different eyesight

using this adjustment you can get the

clearest focus

image possible

the eyepieces also come in two sets

the ten time

and the twenty time

as you can see they can be changed very

easily

moving down to the nose piece the

revolving nose piece

is mounted by four objective lenses

the four times magnification

10 times

the 40 times spring loaded

and the 100 time spring-loaded oil

objective

so now i'll demonstrate using this

slide so you simply put the slide on the

stage

adjust the stage using

the double layer mechanical stage

and the coarse and fine because

adjustment not

as you can see the spring loaded

protects the slides from manipulation

accident

on top of this protection

the stage also has an upward moving lock

that sets the upper limit of the

movement of the stage

so as you can see here i cannot adjust

the stage to a higher level than this

at the bottom this microscope has a

movable condenser

on the condenser there is

a handle that can adjust the iris

diaphragm

also there is also a filter holder

so here i'll use the green filter

and simply put the filter in the holder

and slide it back

as you can see this m82 es model of omax

is compact inexpensive and has fully

loaded features

it is perfect for anyone who wants to do

some scientific

experimentation or lap works

today i'll show you how to assemble and

adjust a

m82 yes omax microscope

once you receive your package to melt

open the

carton box carefully using a knife or

paper cutter

inside you should have a cushion letter

that has a link to the instruction

manual

make sure to keep it and to not discard

it

now take out the styrofoam container in

the box

now make sure that the

to find the up sign with the arrow

pointing upward

on the styrofoam container

and open it

remove the cover very gently and

carefully

take all the pieces out and place them

on a flat

and firm surface in your package you

should have a microscope body

a binocular head two sets

of eyepieces a

headlock thumb screw that might already

be in place on the microscope body

immersion oil

power adapter color filter

and a dust cover so now you're ready to

assemble the microscope

first i'll start with the binocular head

simply remove the cap on the microscope

body

and screw the head block

thumb screw in

very loosely just a little bit

now take the binocular head and remove

the cap

and insert the head in the body

like this make sure that it's seated

completely

and tighten the headlock thumb screw

now now the eyepieces

it is very important to make sure to

remove the caps on the eyepiece tubes

and simply take a pair of eyepieces

and place them in the tube

now take the power cord

and plug

the power cord in the power socket at

back of the microscope

and in the power outlet

turn the switch on and the assembly of

the microscope is now complete

before using the microscope you need to

make some adjustment

so before doing that let's start with

placing the

specimen on the stage usually

you want to use a slide

that is not included in the package of

the microscope

but you can purchase them separately

or so let's take

a slide in order to place it first you

want to

lowers the stage to its minimum height

using the coarse

focus adjustment knob

place the slide on the stage

and gently secure it using the slide

holder

you want to make sure that the slide is

placed right underneath

the objective by using the x

and y adjustment knob

now you want to adjust the intrapupulary

distance

while observing through the eyepieces

hold both eyepiece twos

and slide in and out

when the distance is correct the left

and right

field of view should converge to a

single one that is

you'll see a single image instead of two

now you also want to adjust the

ocular diopter so first

place the 10 times objective

into position and note the

interpupillary distance

rotate the diopter ring to

both diopter rings to that number so in

my case i have 59

as my interpupillary distance so i

simply turn

the diopter ring to that number

so that the white dot points to

59.

and i do the same on the left side

now close one of your eyes

let's say the left one and use your

right eye only

get the image to be focused using the

coarse and fine focus adjustment knobs

once you get it close your right eye and

use your left eye only

now this time do not touch the focus

adjustment knobs but only the diopter

ring

adjusted until you get the image focused

now specimen might differ in size so you

might want to use different objectives

such as d40 times or 100 times

before using them make sure that

the spring moves smoothly

and is not stuck

the proper way of focusing is to start

using the 10 times objective now

use the course and find focus adjustment

knobs

once you get the image focused under the

10 times objective you can

turn the 40 times objective into

position

now only use the fine focus

adjustment knob to get

the image focused

for the 100 times objective the same

procedure applies

however you also need to use the

immersion oil

in order to do this simply

rotate the revolving nose piece

so that the observing position is right

between the 40 and 100 times

objectives

and add one drop

of immersion oil

on the slide

now turn the hundred times objectives

into position

and use the fine

focus adjustment knobs

to get the image focused

in order to get the optimum conditions

for your observation um you can also

adjust

the condenser

and move it up

or down

depending on the objectives you're using

so if you're using higher power

objectives you should raise the

condenser

and lower it when using the four or ten

times objectives

you can also change the size of the

aperture

by moving

the iris diaphragm

and finally the brightness using the

intensity dial

you can also change the color

using a color filter and simply place it

in the filter holder and slide it under

the condenser

now once you're done with your

observation you need to

clean the 100 times objective and the

slides

immediately so simply

use a lens paper that is also not

included

in the microscope package

[Music]

and clean it very gently like this

[Music]

just make sure that

there's no more oil on

the objective lens

and also the slide

[Music]

so when you're using the hundred times

objective

you have to use it with the oil

but when using it make sure that the

40 times that does not require the

oil is dry and does not touch the oil

otherwise it will damage the objective

now if you want to use another the other

pair of eyepieces

simply remove the 10 times eyepieces

and change

place the 20 time

into the eyepiece tube

if you want to use a camera then simply

remove one of the eyepiece

and place the camera into the eyepiece

tube

[Music]

now that you have everything settled you

can enjoy observing under your

m82 yes omax microscope

[Music]

alright thank you so much for watching

and just before you go

you maybe know this already but i have a

free newsletter at findcom.com

sunday where i share some ideas on this

topic and also some

intentional and unintentional asmr picks

so you can find this at find calm dot

com sunday

and also i've written a free book called

seven habits of calm and happy people

which i'd like to give to you

and you can find this at find com.com

book thank you so much