Dressing Grinder Wheels with the Lifetime Diamond Wheel Dresser

Let's look at the Diamond Lifetime Wheel Dresser. This is a dresser that's

going to dress our grinding wheels and it's going to use diamonds to do it

what we've got is about a six-inch piece of metal and on the end here what we

have is a carbide matrix

and what you've got is a carat's worth of

industrial diamonds in this carbide matrix and you can see this one

is the one that came out of our shop that's already been used and you can see

all those little pieces in there now this is that full carat of diamonds

should last a lifetime for you as well as the carbide matrix here

As you know diamond is the hardest material around it so it's going to true any type

of grinding wheel you have: aluminum oxide or whatever you might have so it's

going to do a good job on that. And how to use it is we're just going to take it

and we're going to move it back and forth across the wheel, as the wheel's

going. But let me tell you a characteristic about using a diamond

dresser - and that is that the particles here, in this particular case there are

46 great particles, and that's kind of a little cluster there but since the

diamond is so hard, and actually sharp, it will take that 46 grit particle and

actually cut it and so it'll actually make it run a little bit smoother than

the actual true 46 grip will if you would have used an old-fashioned star dresser so

just keep that in mind that a diamond dresser does a really good job but it

also make your wheel run just a little bit finer than normal

Let me show you how to use it and how we use in our shop and keeps our wheels

nice and clean and true and I'm sure that as you as you'll see that working

you'll want to have one of these in your shop