Buff Or Sand Your Parts With A Drill!

now a super simple and easy way to sand or buff anything is with a drill and this adapter pad

will allow you to run a sandpaper disc or a cleaning pad so let's see what these will

do on here so this is basically like Velcro just push it right on pop it into the drill

and we're going to sand out a scratch with this so we've got a gouge on this aluminum part and

we're going to take some sandpaper to it always helps to have some lubricant or even soapy water

knock that out no problem probably could have used a little lower grit here on the Sandpaper this was

400 probably could have used like 240 or 320 on that would have gone a lot quicker but we get

the point it uh smooth that out really nicely you can also use this adapter pad to sand Plastics but

I would recommend using a foam pad in between sandpaper this will give you a little cushion

so you don't gouge the plastic so we've got a scratch right here that we're going to sand out

probably can't really tell on video but plastic is soft so that's sanded

really quickly now let's see what the red pad will do on this surface

shines it up real quick so whether you are buffing something or sanding something these drill

adapters are pretty handy just to pop into your drill this is a three inch works pretty good on

Parts about three inches wide like the silencer or they're also offered

in five inch which probably would have been better for a larger surface area like this