V-Copter Falcon (2 Armed Drone) Review - Part 1 In-Depth - Unboxing, Inspection, Setup, UPDATING! 🤔

hey guys thanks for tuning in and

welcome to the channel i finally got my

hands on the

v-copter falcon this one i ordered a

long time ago and it was delayed from

kovid it's by zero zero tech and it

finally came in this one does both some

pretty amazing stats here which we're

going to go through this is going to be

the unboxing apparently they sent me the

controller separate we're going to unbox

it set it up do some updating if it

needs it i'll walk through all that with

you and then in the next couple of

videos we're gonna do my infamous range

test we're gonna do flight test

in depth see how everything works on

this this one's kind of interesting only

has two arms and two propellers like a

bicopter i guess you'd call it anyway

this is gonna be fun stay tuned and make

sure you subscribe for the in-depth

review series on the falcon let's get

started

[Music]

v-shaped bicopter tilt rotor control so

the actual rotors are tilted via a gear

joint up here at the top of the arms

up to 50 minutes of flight time now you

guys may have seen some of my range

tests especially on the mavic 3 i did a

whole series on that that one's only

claimed to get like 40 to 45 minutes but

in actuality it seems to only fly for

maybe a maximum of 35 as far as what i

can see if these guys are claiming 50

minutes we are going to test that so

stay tuned for those next couple of

videos 3-axis gimbal wouldn't expect

anything other than a 3-axis nowadays

that's kind of the norm hopefully it

does uh good pictures and videos we're

going to be exploring that as well it

does 4k video so that's kind of the new

standard now on these and also it's

foldable design so just like other

drones it does fold up into more of a

compact design

get this open

wow cool and that's basically all it is

it's just right in the box there this is

like one of those um molded

foam injection molded foam cases and

that's the actual

bicopter case right there pretty small

you know

no real straps or handles on it would

have like to see maybe a

a clip and handles it looks like it's

just basically

pressure fitted together

and there it is that's it

the falcon v copter

cool huh so

that would maybe be my only gripe right

now is it's not really in a bag it's

just kind of in a

a case so you'd have to throw this like

in a backpack or something

let's see if there's anything else in

the box really nothing else just a

couple of manuals here to get started

okay there we go

i was wondering where's all the charging

stuff gonna be

so these are all of the peripherals so

we have a brick

power brick with the battery charger

there wall plug with a figure eight plug

there to go into the brick this looks

like a clip brace i'm not sure what

that's going to be for we're going to

find that out just a sec cable so

different kinds of cables looks like to

connect

to the controller or to charge it there

is a full set of extra propellers we

have two

propellers right here last but not least

a little tool kit looks like it's going

to be for the propeller since these

aren't quick disconnect propellers we're

going to have to screw them in and they

chose to make them a star pattern let's

just open this guy up

bust out the controller so we have

another manual for the controller taking

it out of the main wrapper

so maybe not quite the quality it looks

like as some of the other

mainstream drones like dji but it does

seem like it's

pretty well done we'll inspect that a

little more in just a second

looks like we got a strap here and

that's all there is in that box so this

is like a little lanyard that they throw

in there for you i usually don't put

lanyards on the controller is kind of

light enough maybe if you had a big

tablet on there it might kind of help

support it especially with that 50

minute flight time if it does fly that

long right anyway antennas flip up this

way oh awesome i kind of like that how

they're already on the bottom of the

controller you see that how they're

pointing down

not going to be up in the way at all and

this is interesting so the clamp is

stored all the way over here on the back

just going to unfold this i like this

design so these pop down that's going to

hold the bottom of say a phone the

question is how does this spring open so

it's a very tight spring wow that's

really tight

so

that's as far as that comes open so

that's phone mode

and then if you have a really big phone

you push these down

and that looks like it's not even going

to fit an ipad mini so it looks like i

may want to put one of those 3d printed

extension clamps on this one that i

i have so i'll do that to see if we can

get the ipad

mini on there but i like this how it

kind of just opens up when you have an

ipad on here it might get a little bit

you know squirrely here this isn't

extremely tight this part's very tight

going over to the back here and this is

where the sticks are so similar

idea as some of the other drones just

not quite as fit and finish over at the

back we've got two buttons over here

cooling vent

which is

visible once we take out that clamp

there and then this is just all rubber

where these

sticks are being held these feel really

light so they're like a hollow aluminum

it feels like

and they're just gonna screw right in

here

so screwing those both on be careful not

to cross thread these it felt like

the threads are kind of fine so you

don't want to cross thread rubber

surrounding here so if you're a pincher

no problem you're going to be able to do

that and then if your thumber

does have a very uh

kind of prickly top so it's not gonna

fall off your thumbs the gimbals do feel

quite tight return to home button and a

stop button here zero zero robotics on

the front there up on the top we have a

camera button there and then we have a

picture button there

we have two

rollers so the roller on the left is

spring loaded it pops back and you only

can push it a little ways in both

directions on the right hand side it's

actually a roller that just keeps

clicking

and keeps going in both direction never

stops this is going to have a built-in

lithium battery and that's going to be

how you're going to be charging this

thing it seems with usbc and then this

is going to connect to your device once

you clamp it on anyway guys enough about

the controller let's get in here to

the v copter falcon in here nice and

snug

i'm just going to pop it open

nothing else whatsoever in this molded

case very good protection although it's

not going to carry anything except the

drone there's the arm buttons to open

the arm remember that's how we need to

open the arms because they apparently

lock in it's just telling you that on

both sides so we can take this off now

and they really want you to know this