HOVERAir AQUA | Everything You Need To Know

Welcome to the Hoverare Aqua tutorial.

This is the world's first 100%

waterproof self-flying camera built for

water sports. Let's take a quick look at

what's inside the box.

You've got the Aqua,

the Lighthouse,

and the accessories.

That's everything in the box.

Now, let's get ready for your first

flight.

First, let's get to know the Aqua

buttons.

Long press the power button to turn it

on.

Scan the QR code on the screen to

download the Hover app. Follow the inapp

prompts to complete activation.

Next, let's go over the Lighthouse

buttons.

To power on the lighthouse, just long

press the side power button. Now pair

the Aqua to the Lighthouse. Follow the

onscreen guide to pair the Lighthouse

with your Aqua. Press and hold the up

and rotate left buttons on the

Lighthouse to pair.

Use the select button on the Aqua to

switch modes. It features over 10

selectable modes. Press the confirm

button to enter the parameter settings

for each mode. Adjust your flight and

camera settings here. You can also

adjust settings in the app. Choose a

mode to customize your flight.

Choose manual control in the bottom

right and control the Aqua with your

phone.

Now place the lighthouse on your arm.

Pull the strap tight and fasten it.

For big waves, use the double lock

method and make sure it is secure.

Now you are ready to fly. There are four

ways to take off. To take off from your

hand, press the takeoff button. Do not

block the antenna area at the rear.

Hold. Wait for the propellers to begin

spinning, then let go.

Using the lighthouse, Aqua can take off

and follow you automatically. Press the

takeoff button on your lighthouse to

take off from the water or landing pad.

Upside down, your Aqua will turtle flip

automatically and take off.

Move both joysticks down and inward or

down and outward to start. Then push the

left joystick up and the motors will

start.

Use the takeoff button on the left in

the manual control page.

You can also use any of these four

methods to land. Catch the Aqua first,

then flip it when it returns to you.

You can press the return to home button

on your lighthouse. It can fly back to

you on land or land directly on the

water. You can also use beacon to land.

Just long press the function button to

trigger return to home.

Using the app, simply tap the return

button on the app's manual control page.

To keep your device in top shape,

maintenance after every use is key,

after flying in corrosive water

conditions. With the battery inserted,

rinse the entire device, including the

lens, with fresh water. Pat the lens

dry. Don't rub it. Make sure the battery

port is dry and the water indicator is

white before inserting another battery.

Regularly check the metal connectors. If

corrosion is found, please stop using it

and contact customer service. And keep

your gear in a cool, dry place away from

the sun. Take care of your Aqua and

enjoy the ride on the water.

Now that you've got the basics down,

let's look at how to use Aqua on the

water.

Before taking your Aqua on the water,

always do a quick check. Make sure the

gimbal is moving properly.

Check if the propellers can rotate

freely

and check the water indicator. Only fly

if it's fully white. Check if the seal

gasket has fallen off or is loose.

Double check the battery is fully locked

in.

Press the USBC cover flat. This is

important.

Do not take off immediately. Observe the

icons in the upper left corner and wait

for them to turn on. Wait for the

Omnitrain icon to light up. If the icon

stays off, water takeoff is prohibited.

Omnitrain relies on satellite signals,

so it will function best in an open

environment. Lighthouse tracking ensures

precise tracking in complex

environments, even if the target

disappears.

Strap the lighthouse tightly to your

arm. Give it a shake to make sure it's

secure. You can adjust the parameters on

Aqua before takeoff. The default

settings are optimized for surfing with

adjusted height and distance parameters.

To take off from your hand, pinch your

Aqua on either side of the battery.

Ensure the Omni Terrain and Lighthouse

tracking icons are on. Aim the camera at

yourself and press the takeoff button.

It will start following you.

Alternatively, you can get in the water,

wait for the right moment, drop the aqua

onto the water close to you, and press

the lighthouse takeoff button to fly.

During surfing, tracking may be affected

if the lighthouse enters the water or is

obstructed. Vibration means lighthouse

tracking is lost. Pause and wait for it

to stop before continuing. Want to bring

the Aqua back? Use the lighthouse to

press the return to home button, whether

in the water or on the land.

Remember to clean and maintain your

device after heading back.

You can take Aqua with you on your

paddle board or kayak.

Please select SUP or kayak mode on the

screen and ensure Omni Terrain and

Lighthouse tracking are on. Place your

Aqua on the water and press the takeoff

button on the lighthouse.

Click the return to home button if

needed. It will land on the water nearby

for easy pickup.

When you're finished filming and heading

back to land, please keep the following

in mind. Dry your hands thoroughly

before changing the battery. Check the

water indicator. If it is red, do not

use it again until it is fully white.

After saltwater use, rinse the Aqua with

fresh water for a few minutes to avoid

salt or sand blocking the motors.

Now you're ready to create. Whether it's

big waves or calm waters, let Aqua

capture every epic moment of your

adventure.

Enjoy the ride.